ServicesDecorative Window Tinting
Decorative Window Tinting in Kemah
We install frosted, etched-look and gradient window film that turns plain glass into a finished detail. You get privacy where you need it, softer daylight and protection for the original glass, without replacing a single pane.
Finish the glass you already have
Decorative film is a thin polyester layer applied to the inside of the glass. It can look like acid-etched or sandblasted glass, a soft gradient that fades from frosted to clear, or a simple pattern of lines or dots. Light still comes through. Clear views and direct glare do not.
Most of our decorative work goes on bathroom windows, front door sidelights, transoms, glass shower-facing windows and interior glass doors. It is often the better choice than ordering obscure glass, because the window, frame and seals stay exactly as they are. If your taste changes in ten years, the film can be removed cleanly and the glass underneath looks the way it did on install day.
We have spent 8 years in business putting film on glass, and we treat decorative work as a finish carpentry job: careful measuring, clean edges and a surface that holds up to daily cleaning.
What a decorative film job includes
Design and sample review
We bring film samples to the window so you can see each finish against your own light at different times of day. Frosted, etched-look and gradient options read very differently on a north-facing bathroom than on a west-facing sidelight.
Measuring each pane
Every pane is measured on its own, since older frames are rarely perfectly square. For patterns or bands, we mark heights so lines stay level from one window to the next.
Glass preparation
We scrape and clean the glass to remove paint flecks, mineral spots and old adhesive. Decorative film shows every speck trapped beneath it, so this step takes as long as it needs.
Precise installation
Film is laid wet, squeegeed out and trimmed with a small, even gap at the gasket. That gap lets the edge seal properly and keeps it from lifting.
Removal of old film
If faded or peeling film is already on the glass, we take it off and clear the adhesive before anything new goes on.
Care instructions
Before we leave, we explain how to clean the new film so it keeps its finish for years.
Signs decorative film is the right fit
- You keep the blinds closed all day
- A bathroom or entry window with a permanently shut blind is losing its daylight. Frosted film lets the light in and keeps the view out.
- Neighbors can see straight in
- Sidelights and front door glass often look directly into a hallway or living room. A gradient or etched-look band blocks sightlines at eye level and leaves the top clear.
- Old film has gone cloudy or is peeling
- Aging film yellows, bubbles and lifts at the corners. Replacing it restores a clean look and keeps the glass protected.
- You want the look of etched glass without new windows
- Replacement glass means new seals, labor on the frame and a longer wait. Film gives a similar finish and leaves the existing window untouched.
- Plain glass doors feel unfinished
- Interior glass doors to a pantry, office or laundry room can look bare. A subtle pattern adds detail and a little visual privacy.
How the work goes
- 1
A call and a free quote
You tell us which windows and what you have in mind. We set a time to visit, look at the glass and give you a quote in writing.
- 2
Choosing the finish
We hold samples up to your windows and talk through how each one handles light, privacy and cleaning. There is no pressure to pick the most elaborate option.
- 3
Installation day
We lay drop cloths below each window, clean the glass and apply the film. Our insured installers work room by room, and most homes need only a few hours.
- 4
Curing and follow-up
While the mounting solution dries, new film can carry a faint milkiness and a few tiny beads of trapped moisture for several days. Damp Gulf air can stretch that out somewhat, and it fades without anything needed from you. If something still looks wrong once the film has cured, call us and we will come back to check it.
What moves the price
Decorative film is priced by the glass, the film and the time each window takes. We quote after seeing the windows, and the written quote lists each area so you know what you are paying for.
- Total glass area and pane count
- Larger windows use more film, and many small divided panes take more trimming time than one large sheet.
- Type of finish
- A plain frost costs less than a gradient or patterned film. Bands set at specific heights add layout time.
- Old film removal
- Stripping aged film and baked-on adhesive is slow, careful work and is quoted separately.
- Access and height
- Transoms, stairwell windows and tall glass need ladders or extra setup, which adds time.
- Condition of the glass
- Heavy mineral staining or paint overspray needs more prep before film can go on cleanly.
Decorative film questions
- Can people see in at night with frosted film?
- Frosted and etched-look films stay obscuring day and night, which is why they suit bathrooms and entries. You will see soft shapes and light, not detail. That is different from reflective film, which works mainly in daylight.
- How do I clean decorative film?
- Wait about 30 days after install so the adhesive fully cures. After that, use mild soapy water and a soft cloth or rubber squeegee. Skip ammonia cleaners, razor blades and abrasive pads, which can scratch or dull the surface.
- Will it damage my windows if I remove it later?
- No. Quality decorative film is designed to come off. We peel it and clean off the adhesive, and the glass is left as it was.
- Is decorative film covered by a warranty?
- We offer a lifetime warranty on home window tinting. We will go over exactly how it applies to the film you choose when we give your quote.
- Does decorative film block heat or UV?
- It blocks a good share of UV, which helps slow fading on floors and furniture near the window. It is not built for heat rejection. If heat is the main problem, ceramic window film is the better match, and we can pair the two on different windows.
Give plain glass a lasting finish
Tell us which windows you are thinking about and we will bring samples to see them in your own light. We work in Kemah and nearby towns including League City, Seabrook and Webster.